IR@PKUHSC  > 北京大学口腔医学院  > 口腔修复科
学科主题口腔医学
Finite element analysis of stress distribution of obturator prostheses for acquired unilateral maxillary defects
Feng, YZ; Feng, HL; Wu, HJ
关键词maxillary defect obturator prosthesis 3-dimention finite element stress
刊名JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY
2005-10-01
suppl.1页:365-368
收录类别SCI
文章类型Article
WOS标题词Science & Technology
类目[WOS]Metallurgy & Metallurgical Engineering
研究领域[WOS]Metallurgy & Metallurgical Engineering
关键词[WOS]QUALITY-OF-LIFE ; MIDFACE RECONSTRUCTION ; FRAMEWORK DESIGN ; FREE-FLAP ; MAXILLECTOMY ; RESECTION
英文摘要

Objective To assess stresses produced by different obturator prostheses. Methods Three-dimensional finite element models of unilateral maxillary defects rehabilitated with different obturators were constructed. The different stresses were analyzed by three-dimensional finite element method under different load angle. Results The Von Mises stress values obtained for the remaining tissues adjacent to defect cavity were higher when rehabilitated by inferior hollow obturator in comparison with by superior hollow obturator. The maximum of Von Mises were higher when rehabilitated by resilient hollow obturator than by rigid hollow obturator. It was also observed that in the rigid type stress distribution contours formed in the remaining tissues adjacent to defect cavity, while in resilient hollow obturator prostheses the stress distributed mainly in the prosthesis itself. The oblique load shows the most maximum of Von Mises among all types of obturator prostheses. Conclusions A high lateral wall of an obturator may be more better in preserving the remaining structures than a shorter prosthesis lateral wall. A soft liner may be incorporated to reduce the pain of the residual maxillary structures and mucosa. When load on defect, higher stress would be generated to the residual maxillary structures. The adjustment of occlusual relationship is very important.

语种英语
WOS记录号WOS:000234422700073
引用统计
文献类型期刊论文
条目标识符http://ir.bjmu.edu.cn/handle/400002259/66766
专题北京大学口腔医学院_口腔修复科
作者单位1.Cent S Univ, Xiangya Hosp 2, Dept Stomatol, Changsha 410011, Peoples R China
2.Peking Univ, Sch Stomatol, Dept Prosthodont, Beijing 100081, Peoples R China
推荐引用方式
GB/T 7714
Feng, YZ,Feng, HL,Wu, HJ. Finite element analysis of stress distribution of obturator prostheses for acquired unilateral maxillary defects[J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY,2005,suppl.1:365-368.
APA Feng, YZ,Feng, HL,&Wu, HJ.(2005).Finite element analysis of stress distribution of obturator prostheses for acquired unilateral maxillary defects.JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY,suppl.1,365-368.
MLA Feng, YZ,et al."Finite element analysis of stress distribution of obturator prostheses for acquired unilateral maxillary defects".JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY suppl.1(2005):365-368.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Feng, YZ]的文章
[Feng, HL]的文章
[Wu, HJ]的文章
百度学术
百度学术中相似的文章
[Feng, YZ]的文章
[Feng, HL]的文章
[Wu, HJ]的文章
必应学术
必应学术中相似的文章
[Feng, YZ]的文章
[Feng, HL]的文章
[Wu, HJ]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。